View M170ETN01-V0_7866780.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

au optronics corporation product specification document version 0.1 1/16 m170etn01 v0 ( v ) preliminary specification ( ) final specification module 17.0? sxga color tft-lcd model name m170etn01 v0 customer date approved by note: this specification is subject to change witho ut notice. checked & approved by date chiyi wu 2011/11/15 prepared by arnold hsu 2011/11/15 desktop display business group / au optronics corporation free datasheet http://
au optronics corporation product specification document version 0.1 2/16 m170etn01 v0 contents 1. handling precautions............................ ................................................... ............................... 4 2. general description ............................. ................................................... ................................ 5 2.1 display characteristics ........................ ................................................... ............................................ 5 3. functional block diagram ........................ ................................................... ......................... 10 4. absolute maximum ratings........................ ................................................... ....................... 11 4.1 tft lcd module ................................. ................................................... ......................................... 11 4.2 backlight unit ................................. ................................................... ............................................... 11 4.3 absolute ratings of environment ................ ................................................... .................................. 11 5. electrical characteristics ...................... ................................................... ............................. 12 5.1 tft lcd module ................................. ................................................... ......................................... 12 5.2 backlight unit ................................. ................................................... ............................................... 14 6. signal characteristic........................... ................................................... ............................... 15 6.1 pixel format image............................. ................................................... ........................................... 15 6.2 the input data format .......................... ................................................... ......................................... 15 6.4 timing characteristics ......................... ................................................... .......................................... 16 6.5 power on/off sequence.......................... ................................................... .................................... 16 7. connector & pin assignment ...................... ................................................... ...................... 16 7.1 tft lcd module ................................. ................................................... ......................................... 16 7.2 backlight unit ................................. ................................................... ............................................... 16 8. reliability test ................................ ................................................... .................................... 16 9. shipping label.................................. ................................................... .................................. 16 10. mechanical characteristics ..................... ................................................... ........................ 16 free datasheet http://
au optronics corporation product specification document version 0.1 3/16 m170etn01 v0 record of revision version and date page old description new description remark 0.1 2011/11/15 all first edition for customer all free datasheet http://
au optronics corporation product specification document version 0.1 4/16 m170etn01 v0 1. handling precautions 1) since front polarizer is easily damaged, pay att ention not to scratch it. 2) be sure to turn off power supply when inserting or disconnecting from input connector. 3) wipe off water drop immediately. long contact wi th water may cause discoloration or spots. 4) when the panel surface is soiled, wipe it with a bsorbent cotton or other soft cloth. 5) since the panel is made of glass, it may break o r crack if dropped or bumped on hard surface. 6) since cmos lsi is used in this module, take care of static electricity and insure human earth when handling. 7) do not open or modify the module assembly. 8) do not press the reflector sheet at the back of the module to any directions. 9) in case if a module has to be put back into the packing container slot after once it was taken out from the container, do not press the center of the ccfl reflector edge. instead, press at the far ends of the ccfl reflector edge softly. otherwise t he tft module may be damaged. 10) at the insertion or removal of the signal inter face connector, be sure not to rotate nor tilt the interface connector of the tft module. 11) after installation of the tft module into an en closure, do not twist nor bend the tft module even momentary. at designing the enclosure, it should be taken into consideration that no bending/twisting forces are applied to the tft modu le from outside. otherwise the tft module may be damaged. 12) cold cathode fluorescent lamp in lcd contains a small amount of mercury. please follow local ordinances or regulations for disposal. 13) small amount of materials having no flammabilit y grade is used in the lcd module. the lcd module should be supplied by power complied with requireme nts of limited power source (iec60950 or ul1950), or be applied exemption. 14) the lcd module is designed so that the ccfl in it is supplied by limited current circuit (iec60950 or ul1950). do not connect the ccfl in hazardous volta ge circuit. 15) please avoid touching cof position while you are do ing mechanical design. free datasheet http://
au optronics corporation product specification document version 0.1 5/16 m170etn01 v0 2. general description this specification applies to the 17 inch color tft -lcd module m170etn01 v0. the display supports the sxga+ (1280(h) x 1024(v)) screen format and 16.7m colors (rgb 6-bits+hi-rfc data).all input signals are 2 channel lvds interfac e compatible. this module does not contain an inverter card for b acklight. 2.1 display characteristics the following items are characteristics summary on the table under 25 condition: items unit specifications screen diagonal [mm] 432 (17.0?) active area [mm] 337.920(h) 270.336(v) pixels h x v 1280 3(rgb) 1024 pixel pitch [mm] 0.264(per one triad) 0.264 pixel arrangement r.g.b. vertical stripe display mode normally white white luminance [cd/m 2 ] 250 (center,typ)@ 7.5 ma contrast ratio 1000 : 1 (typ) optical responsetime [msec] 5 (typ) nominal input voltage vdd [volt] +5.0 (typ) power consumption (vdd line + ccfl line) [watt] 12.55w => (typ.) (without inverter, all black pattern) weight [grams] 1990 typ. physical size (h x v x d) [mm] 358.5(h) x 296.5(v) typ. x 15.8(d) max. electrical interface dual channel lvds surface treatment anti-glare type, hardness 3h support color 16.7m colors (rgb 6-bits +hi-frc dat a) temperature range operating storage (non-operating) [ o c] [ o c] 0 to +50 -20 to +60 rohs compliance rohs compliance digital gamma turn on compliance tco5.0 compliance free datasheet http://
au optronics corporation product specification document version 0.1 6/16 m170etn01 v0 2.2 optical characteristics the optical characteristics are measured under stab le conditions at 25 (room temperature): item unit conditions min. typ. max. note horizontal (right) cr = 10 (left) 140 170 - viewing angle [degree] vertical (up) cr = 10 (down) 140 160 - 1 luminance uniformity [%] 9 points 75 80 - 2, 3 rising - 3.5 6 falling - 1.5 3 optical response time [msec] rising + falling - 5 9 4, 6 red x 0.623 0.653 0.683 red y 0.298 0.328 0.358 green x 0.273 0.303 0.333 green y 0.578 0.608 0.638 blue x 0.114 0.144 0.174 blue y 0.034 0.064 0.094 white x 0.283 0.313 0.343 color / chromaticity coordinates (cie 1931) white y 0.299 0.329 0.359 4 white luminance (at ccfl= 7.5ma) [cd/m 2 ] 200 250 - 4 contrast ratio 600 1000 - 4 cross talk (at 75hz) [%] - - 1.5 5 flicker [db] - - -20 7 optical equipment: bm-5a, bm-7, pr880, or equivalen t free datasheet http://
au optronics corporation product specification document version 0.1 7/16 m170etn01 v0 note 1: definition of viewing angle viewing angle is the measurement of contrast ratio R 10, at the screen center, over a 180 horizontal and 180 vertical range (off-normal viewing angles) . the 180 viewing angle range is broken down as follows; 90 ( ) horizontal left and right and 90 ( ) vertical, high (up) and low (down). the measurement direction is typically perpendicular to the display surface with the screen rotated about its center to develop the desired measurement viewing a ngle. note 2: 9 points position note 3: the luminance uniformity of 9 points is def ined by dividing the maximum luminance values by th e minimum test point luminance minimum luminance of 9 points w9 = m ax imum luminance of 9 points 50 % 90 % 90 % 50 % 10 % 10 % free datasheet http://
au optronics corporation product specification document version 0.1 8/16 m170etn01 v0 note 4: measurement method the lcd module should be stabilized at given temper ature for 30 minutes to avoid abrupt temperature change during measuring. in order to stabilize the luminance, the measurement should be executed after lighting backlight for 30 minutes in a stable, wind less and dark room. note 5: definition of cross talk (ct) ct = | yb ? ya | / ya 100 (%) where ya = luminance of measured location without gray le vel 0 pattern (cd/m2) yb = luminance of measured location with gray level 0 pattern (cd/m2) center of the screen tft - lcd module 50 cm photo detector lcd panel field=2 free datasheet http://
au optronics corporation product specification document version 0.1 9/16 m170etn01 v0 note 6: definition of response time: the output signals of photo detector are measured w hen the input signals are changed from ?full black? to ?full white? (rising time), and from ?full white? t o ?full black ?(falling time), respectively. the re sponse time is interval between the 10% and 90% of amplitudes. please refer to the figure as below. note 7: subchecker pattern r g b r g b r g b r g b r g b r g b method: record dbv & dc value with (westar)trd -100 level dc hz) 30 level(at ac log 20 (db) flicker = 100 90 10 0 % optical response white black white tr f tr r 100 90 10 0 % optical response white black white tr f tr r gray level = l127 gray level = l0 amplitude time dc ac free datasheet http://
au optronics corporation product specification document version 0.1 10/16 m170etn01 v0 3. functional block diagram the following diagram shows the functional block of the 17.0 inches color tft-lcd module: i/f pcb interface: ccfl connector: jae fi-xb30ssla-hf15 yeonho 35001hs-02l p-two 187034-30091 cvilux cp0502sl090 stm msbkt2407p30hb mating type: fi-x30hl (locked type) fi-x30h (unlocked type) 2 ccfl connector dc/dc converter lvds receiver timing controller gamma correction tft-lcd 1280*(3)*1024 pixels g1024 g1 d1 d3840 inverte r dc power au asic mini-lvds transmitter lvds + 5v free datasheet http://
au optronics corporation product specification document version 0.1 11/16 m170etn01 v0 4. absolute maximum ratings absolute maximum ratings of the module is as follow ing: 4.1 tft lcd module item symbol min max unit conditions logic/lcd drive voltage vin -0.3 6 [volt] note 1,2 4.2 backlight unit item symbol min max unit conditions ccfl current icfl - 8 [ma] rms note 1,2 4.3 absolute ratings of environment item symbol min max unit conditions operating humidity hop 5 90 [%rh] storage temperature tst -20 +60 [ o c] storage humidity hst 5 90 [%rh] note 3 note 1: with in ta (25 ) note 2: permanent damage to the device may occur if exceed maximum values note 3: for quality performance, please refer to auo iis ( incoming inspection standard). operating range storage range free datasheet http://
au optronics corporation product specification document version 0.1 12/16 m170etn01 v0 5. electrical characteristics 5.1 tft lcd module 5.1.1 power specification input power specifications are as follows: note: measurement conditions: +5.0v +12.0v vcc r1 47k r2 1k vr1 47k sw1 sw mag-spst 1 2 f1 q3 ao6402 g d2 s d1 d5 d6 c1 1uf/16v q3 ao6402 g d2 s d1 d5 d6 c3 0.01uf/25v c2 1uf/25v (high to low) control signal (lcd module input) symbol parameter min typ max unit conditions vdd logic/lcd drive voltage 4.5 5.0 5.5 [volt] +/-10% - 0.47 0.56 [a] vdd= 5.0v, all black pattern at 60hz, idd input current 0.59 0.71 vdd= 5.0v, all black pattern at 75hz, - 2.35 2.82 [watt] vdd= 5.0v, all black pattern at 60hz pdd vdd power 2.95 3.54 vdd= 5.0v, all black pattern at 75hz irush inrush current - - tbd [a] note 1 vddrp allowable logic/lcd drive ripple voltage - - 500 [mv] p-p vdd= 5.0v, all black pattern at 75hz 90% 10% vdd rising time 0v 5.0v 0.5ms free datasheet http://
au optronics corporation product specification document version 0.1 13/16 m170etn01 v0 5.1.2 signal electrical characteristics input signals shall be low or hi-z state when vin i s off it is recommended to refer the specifications of sn 75lvds82dgg (texas instruments) in detail. each signal characteristics are as follows; symbol parameter min typ max units condition vth differential input high threshold - - +100 [mv] vicm = 1.2v note vtl differential input low threshold -100 - - [mv] vicm = 1.2v note vid input differential voltage 100 400 600 [mv] note vicm differential input common mode voltage +1.0 +1.2 +1.5 [v] vth-vtl = 200mv(min) note note: lvds signal waveform free datasheet http://
au optronics corporation product specification document version 0.1 14/16 m170etn01 v0 5.2 backlight unit parameter guideline for ccfl inverter parameter min. typ. max. unit condition ccfl standard current(iscfl) 7 7.5 8 [ma] rms (ta=25 o c) note 2 ccfl operation current (ircfl) 3 7.5 8 [ma] rms (ta=25 o c) note 2 ccfl frequency (fcfl) 40 60 80 [khz] (ta=25 o c) note 3,4 ccfl ignition voltage (vicfl, ta= 0 ) 1560 - [volt] rms (ta=0 o c) note 5 ccfl ignition voltage (vicf, ta= 25 ) 1200 - [volt] rms (ta=25 o c) note 5 ccfl operation voltage (vcfl) 580 @ 7.5ma 630 @ 7.5ma 680 @ 7.5ma [volt] rms (ta=25 o c) note 6 ccfl power consumption (pcfl) 8.7 9.45 10.2 [watt] (ta=25 o c) note 6 ccfl life time (ltcfl) 50,000 - - [hour] (ta=25 o c) note 1: typ. are auo recommended design points. *1 all of characteristics listed are measured under the condition using the auo test inverter. *2 in case of using an inverter other than listed, it is recommended to check the inverter carefully. sometimes, interfering noise stripes appear on the screen, and substandard luminance or flicker at low power may happen. *3 in designing an inverter, it is suggested to che ck safety circuit very carefully. impedance of ccfl, for instance, becomes more than 1 [m ohm] whe n ccfl is damaged. *4 generally, ccfl has some amount of delay time af ter applying kick-off voltage. it is recommended to keep on applying kick-off voltage fo r 1 [sec] until discharge. *5 reducing ccfl current increases ccfl discharge v oltage and generally increases ccfl discharge frequency. so all the parameters of an in verter should be carefully designed so as not to produce too much leakage current from high-volta ge output of the inverter. note 2: it should be employed the inverter which ha s ?duty dimming?, if ircfl is less than 3ma. note 3: ccfl discharge frequency should be carefull y determined to avoid interference between inverter and tft lcd. note 4: the frequency range will not affect to lamp life and reliability characteristics. note 5: ccfl inverter should be able to give out a power that has a generating capacity of over 1,560 voltage. lamp units need 1,560 voltage minimum for ignition. note 6: the variance of ccfl power consumption is 10%. calculator value for reference (iscfl vcfl 2= pcfl) note 7:definition of life time: brightness becomes 50%. the typical life time ccfl in on the condition at 7.5 m a lamp current. free datasheet http://
au optronics corporation product specification document version 0.1 15/16 m170etn01 v0 6. signal characteristic 6.1 pixel format image following figure shows the relationship of the inpu t signals and lcd pixel format. r g b r g b r g b r g b r g b r g b r g b r g b 1 2 1279 1280 1st line 1024th line 6.2 the input data format note1: normally, de, vs, hs on even channel are not used. note2: please follow pswg. note3: 8-bit in free datasheet http://
au optronics corporation product specification document version 0.1 16/16 m170etn01 v0 6.3 signal description the module using a pair of lvds receiver sn75lvds82 (texas instruments) or compatible. lvds is a differential signal technology for lcd interface an d high speed data transfer device. transmitter shal l be sn75lvds83(negative edge sampling) or compatible . the first lvds port(rxoxxx) transmits odd pixels while the second lvds port(rxexxx) transmits even p ixels. pin # signal name description 1 rxo0 - negative lvds differential data input (odd data) 2 rxo0+ positive lvds differential dat a input (odd data) 3 rxo1 - negative lvds differential data input (odd data) 4 rxo1+ positive lvds differential data input (odd data) 5 rxo2 - negative lvds differential data input (odd data, h - sync,v - sync,dsptmg) 6 rxo2+ positive lvds differential data input (odd data, h - sync,v - sync,dsptmg) 7 gnd power ground 8 rxoc - negative lvds differential clock input (odd clock) 9 rxoc+ positive lvds differential clock input (odd clock) 10 rxo3 - negative lvds differential data input (odd data) 11 rxo3+ positive lvds differential data input (odd data) 12 rxe0 - negative lvds differential data input ( even data ) 13 rxe0+ positive lvds differential data input (even data) 14 gnd power ground 15 rxe1 - negative lvds differential data input (even data) 16 rxe1+ posi tive lvds differential data input (even data) 17 gnd power ground 18 rxe2 - negative lvds differential data input (even data) 19 rxe2+ positive lvds differential data input (even data) 20 rxec - negative lvds differential clock input (even clock) 21 rxe c+ positive lvds differential clock input (even clock) 22 rxe3 - negative lvds differential data input (even data) 23 rxe3+ positive lvds differential data input (even data) 24 gnd power ground 25 gnd power ground (for auo test aging+hvs mode ) 26 nc n o contact 27 gnd power ground 28 vcc +5.0v power supply 29 vcc +5.0v power supply 30 vcc +5.0v power supply free datasheet http://
au optronics corporation product specification document version 0.1 17/16 m170etn01 v0 note1: start from left side note2: input signals of odd and even clock shall be the same timing. note3: please follow pswg. connector 1 30 rxo in 0 - vcc free datasheet http://
au optronics corporation product specification document version 0.1 18/16 m170etn01 v0 6.4 timing characteristics 6.4.1 timing characteristics basically, interface timings described here is not actual input timing of lcd module but output timing of sn75lvds82dgg (texas instruments) or equivalent. signal item symbol min typ max unit period tv 1032 1066 1150 th active tdisp(v) 1024 1024 1024 th vertical section blanking tbp(v)+tfp(v)+pwvs 8 42 126 th period th 780 844 2048 tclk active tdisp(h) 640 640 640 tclk horizontal section blanking tbp(h)+tfp(h)+pwhs 140 204 1408 tclk period tclk 14.81 18.52 25 ns clock frequency freq 40 54 67.5 mhz frame rate frame rate f 50 60 75 hz note : de mode only free datasheet http://
au optronics corporation product specification document version 0.1 19/16 m170etn01 v0 6.4.2 timing digram hsync pixel n 1 m invalid data tdisp(v) 10 de de invalid data rgb data th 2 rgb data (even) 3 9 m-1 invalid data 1 n hsync m-2 invalid data 11 6 5 m-3 vsync invalid data clk m-5 invalid data m-4 7 2 tbp(h) pixel pixel pixel pixel pixel rgb data (odd) 12 tbp(v) tclk pixel pixel pixel pixel pixel pixel pixel pixel pixel pixel pixel pixel 8 4 3 4 tv tdisp(h) line line line line line line tfp(v) tfp(h) pwvs pwhs free datasheet http://
au optronics corporation product specification document version 0.1 20/16 m170etn01 v0 6.5 power on/off sequence vdd power and lamp on/off sequence is as follows. i nterface signals are also shown in the chart. signa ls from any system shall be hi-z state or low level wh en vdd is off. power sequence timing value parameter min. typ. max. unit t1 0.5 10 0.5 [ms] t2 0 50 0 [ms] t3 500 - 500 [ms] t4 200 - 200 [ms] t5 40 - 40 [ms] t6 1000 - 1000 [ms] note: the values of the table are follow pswg. 0v t1 t2 t3 t4 t5 t6 power supply vdd lvds signal backlight on 10% 90% 90% 10% valid data note 0v t1 t2 t3 t4 t5 t6 power supply vdd lvds signal backlight on 10% 90% 90% 10% valid data note free datasheet http://
au optronics corporation product specification document version 0.1 21/16 m170etn01 v0 7. connector & pin assignment physical interface is described as for the connecto r on module.these connectors are capable of accommodating the following signals and will be fol lowing components . 7.1 tft lcd module 7.1.1 connector connector name / designation interface connector / interface card manufacturer jae / p-two / stm type part number fi-xb30ssla-hf15/187034-3009/ msbkt2407p30hb mating housing part number jae fi-x30hl 7.1.2 pin assignment pin# signal name pin# signal name 1 rxoin0- 2 rxoin0+ 3 rxoin1- 4 rxoin1+ 5 rxoin2- 6 rxoin2+ 7 gnd 8 rxoclkin- 9 rxoclkin+ 10 rxoin3- 11 rxoin3+ 12 rxein0- 13 rxein0+ 14 gnd 15 rxein1- 16 rxein1+ 17 gnd 18 rxein2- 19 rxein2+ 20 rxeclkin- 21 rxeclkin+ 22 rxein3- 23 rxein3+ 24 gnd 25 gnd (agmode+hvs) 26 nc 27 gnd 28 vcc 29 vcc 30 vcc free datasheet http://
au optronics corporation product specification document version 0.1 22/16 m170etn01 v0 7.2 backlight unit physical interface is described as for the connecto r on module. these connectors are capable of accommodating the following signals and will be fol lowing components. connector name / designation lamp connector / backlight lamp manufacturer yeonho or cvilux type part number 35001hs-02l or cp0502sl090 mating type part number 35001wr-02l or cp0502p1ml0 7.2.1 signal for lamp connector connector no. pin no. input color function 1 hot1 pink high voltage (lamp 1) upper cn1 2 cold1 white low voltage (lamp 1) connector no. pin no. input color function 1 hot1 pink high voltage (lamp 2) lower cn2 2 cold1 white low voltage (lamp 2) free datasheet http://
au optronics corporation product specification document version 0.1 23/16 m170etn01 v0 8. reliability test environment test conditions are listed as following table. items required condition note temperature humidity bias (thb) ta= 50 , 80%rh, 300hours high temperature operation (hto) ta= 50 , 50%rh, 300hours low temperature operation (lto) ta= 0 , 300hours high temperature storage (hts) ta= 60 , 300hours low temperature storage (lts) ta= -20 , 300hours vibration test (non-operation) acceleration: 1.5 g wave: random frequency: 10 - 200 - 10 hz sweep: 30 minutes each axis (x, y, z) shock test (non-operation) acceleration: 50 g wave: half-sine active time: 20 ms direction: x, y, z (one time for each axis) drop test height: 60 cm, package test thermal shock test (tst) -20 /30min, 60 /30min, 100 cycles 1 on/off test on/10sec, off/10sec, 30,000 cycles contact discharge: 8kv, 150pf(330 ) 1sec, 8 points, 25 times/ point. esd (electrostatic discharge) air discharge: 15kv, 150pf(330 ) 1sec 8 points, 25 times/ point. 2 altitude test operation:10,000 ft non-operation:30,000 ft note 1: the tft-lcd module will not sustain damage after being subjected to 100 cycles of rapid temperature change. a cycle of rapid temperature ch ange consists of varying the temperature from -2 0 to 6 0 , and back again. power is not applied during the t est. after temperature cycling, the unit is placed in normal room ambient for at least 4 hours before power on. note 2: according to en61000-4-2 , esd class b: som e performance degradation allowed. no data lost. self-recoverable. no hardware failures. free datasheet http://
au optronics corporation product specification document version 0.1 24/16 m170etn01 v0 9. shipping label the shipping label format is shown as below. m170etn01 v0 free datasheet http://
au optronics corporation product specification document version 0.1 25/16 m170etn01 v0 10. mechanical characteristics free datasheet http://

▲Up To Search▲

Price & Availability of M170ETN01-V0

	To Download M170ETN01-V0 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .